East Midlands · England
Fire Door Hinges & Ironmongery in Derbyshire
Managing buildings across Derbyshire? We cover fire door ironmongery repairs in Derby, Chesterfield, High Peak and the rest of the county with one point of contact.
Fire Door Hinges & Ironmongery: Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.
- Area
- Derbyshire
- Region
- East Midlands
- Postcode areas
- DE, NG, S, SK
- Towns listed
- 13
- Local authorities
- Derby, Derbyshire
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
What every job in Derbyshire includes
- Intumescent wraps or pads behind morticed hardware
- Hinges suitable for fire doors, usually at least three per leaf
- Pull handles, push plates and kick plates fitted within limits
- Removal or correction of non-compliant additions
- Latches, sashlocks and deadlocks with intumescent protection where needed
- Fire-rated letter plates and spy holes for flat entrance doors
How does it work in Derbyshire?
Identify
We record existing hardware and what the door needs.
Specify
Replacement items chosen with fire test evidence for the door type.
Fit
Hardware fitted with intumescent protection where required.
Test
Door operation checked from both sides.
What the law requires in Derbyshire
Derbyshire is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies to the common parts and non-domestic premises, and regulation 10 adds quarterly communal and annual flat entrance door checks in residential buildings with storeys over 11 metres.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
Guide prices in Derbyshire
Guide prices for fire door ironmongery repairs in Derbyshire are typically £70–£190 per item, ex VAT.
Fire Door Hinges & Ironmongery by town in Derbyshire
- Fire Door Hinges & Ironmongery in Alfreton
- Fire Door Hinges & Ironmongery in Belper
- Fire Door Hinges & Ironmongery in Buxton
- Fire Door Hinges & Ironmongery in Chesterfield
- Fire Door Hinges & Ironmongery in Derby
- Fire Door Hinges & Ironmongery in Dronfield
- Fire Door Hinges & Ironmongery in Heanor
- Fire Door Hinges & Ironmongery in High Peak
- Fire Door Hinges & Ironmongery in Ilkeston
- Fire Door Hinges & Ironmongery in Long Eaton
- Fire Door Hinges & Ironmongery in Ripley
- Fire Door Hinges & Ironmongery in Staveley
- Fire Door Hinges & Ironmongery in Swadlincote
Fire Door Hinges & Ironmongery in Derbyshire: questions
How many hinges does a fire door need?
Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.
Are cat flaps allowed in fire doors?
Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.
Which fire safety law applies in Derbyshire?
Derbyshire is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.
How quickly can you inspect fire doors in Derbyshire?
It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.