Derbyshire · NG10

Fire Door Hinges & Ironmongery in Long Eaton

From the NG10 district outwards, we cover Long Eaton and neighbouring towns such as Ilkeston and Nottingham for fire door ironmongery repairs.

Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire. We use the same method for buildings in Long Eaton.

Town: Long Eaton
County / area: Derbyshire
County council: Derbyshire
Postcode district: NG10
Region: East Midlands
Population: Around 48,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Ilkeston (8 km)

Fire doors in Long Eaton's buildings

Care homes, schools and small residential blocks are typical Long Eaton buildings with fire doors to look after. For fire door ironmongery repairs, we group Long Eaton visits with nearby buildings wherever possible to keep your price down.

Included as standard in Long Eaton

Intumescent wraps or pads behind morticed hardware
Pull handles, push plates and kick plates fitted within limits
Latches, sashlocks and deadlocks with intumescent protection where needed
Fire-rated letter plates and spy holes for flat entrance doors
Hinges suitable for fire doors, usually at least three per leaf

Additions	No unapproved bolts, chains or cat flaps through the leaf.
Morticing	Lock and latch cut-outs within the door's evidence and protected.
Marking	Hardware CE or UKCA marked where the product standard requires it.

Full details on our fire door hinges & ironmongery page.

Why book with us in Long Eaton?

Priced door by door

Every failed item in Long Eaton is priced separately, so you approve exactly what you want done.

Same report everywhere

Whether your building is in Long Eaton or across the country, the report format, defect grading and pricing are the same.

One contact

One point of contact for inspections, repairs and replacements across Long Eaton and Derbyshire.

England fire safety law in Long Eaton

Buildings in Long Eaton fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.

Prices in Long Eaton

In Long Eaton, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Long Eaton building.

Common questions in Long Eaton

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.

How quickly can you inspect fire doors in Long Eaton?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.

Which fire safety law applies in Long Eaton?

Long Eaton is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.