Derbyshire · DE7
Fire Door Hinges & Ironmongery in Ilkeston
Ilkeston landlords, managing agents and facilities teams can book fire door ironmongery repairs with straightforward reports and fixed prices.
In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.
- Town
- Ilkeston
- County / area
- Derbyshire
- County council
- Derbyshire
- Postcode district
- DE7
- Region
- East Midlands
- Population
- Around 41,000 people
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
- Nearest town
- Heanor (6 km)
Typical Ilkeston fire door jobs
Ilkeston has smaller blocks of flats, flats above shops, care homes and schools, where a single day on site often covers every fire door. If you look after more than one building around Ilkeston, we can schedule them on the same day.
What you get in Ilkeston
- Removal or correction of non-compliant additions
- Intumescent wraps or pads behind morticed hardware
- Fire-rated letter plates and spy holes for flat entrance doors
- Latches, sashlocks and deadlocks with intumescent protection where needed
- Hinges suitable for fire doors, usually at least three per leaf
| Morticing | Lock and latch cut-outs within the door's evidence and protected. |
|---|---|
| Marking | Hardware CE or UKCA marked where the product standard requires it. |
| Additions | No unapproved bolts, chains or cat flaps through the leaf. |
Full details on our fire door hinges & ironmongery page.
How we work in Ilkeston
Records you can use
PDF and spreadsheet records for every Ilkeston building, ready for your fire risk assessor.
One contact
One point of contact for inspections, repairs and replacements across Ilkeston and Derbyshire.
Photos of every defect
You get photographs of every defect found in Ilkeston, linked to a door reference you can find again.
Which fire door rules apply in Ilkeston?
Buildings in Ilkeston fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.
Ilkeston guide prices
In Ilkeston, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Ilkeston building.
Questions from Ilkeston clients
Are cat flaps allowed in fire doors?
Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.
How many hinges does a fire door need?
Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.
Which fire safety law applies in Ilkeston?
Ilkeston is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.
Do you cover the area around Ilkeston?
Yes. As well as Ilkeston itself we cover nearby towns including Heanor, Long Eaton and Ripley.
Nearby towns we cover
- Fire Door Hinges & Ironmongery in Heanor
- Fire Door Hinges & Ironmongery in Long Eaton
- Fire Door Hinges & Ironmongery in Ripley
- Fire Door Hinges & Ironmongery in Hucknall
- Fire Door Hinges & Ironmongery in Nottingham
- Fire Door Hinges & Ironmongery in Arnold
Other fire door services in Ilkeston
- Fire Door Hold-Open Devices in Ilkeston
- Fire Door Gap Adjustment in Ilkeston
- Fire Exit Door Checks in Ilkeston
- Urgent Fire Door Repairs in Ilkeston
- Fire Door Replacement in Ilkeston
- Intumescent & Smoke Seal Replacement in Ilkeston
- Fire Door Installation in Ilkeston
- Fire Door Remedial Works in Ilkeston
- All services in Ilkeston