Derbyshire · SK23

Fire Door Hinges & Ironmongery in High Peak

We provide fire door ironmongery repairs for buildings in High Peak and the SK23 postcode district, from single doors to whole blocks and estates.

In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: High Peak
County / area: Derbyshire
County council: Derbyshire
Postcode district: SK23
Region: East Midlands
Population: Around 93,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Buxton (13 km)

Fire doors in High Peak's buildings

Buildings in High Peak range from 1960s flats to new-build apartment schemes, plus care homes, schools and retail units with stock rooms and stair doors. If you look after more than one building around High Peak, we can schedule them on the same day.

Included as standard in High Peak

Hinges suitable for fire doors, usually at least three per leaf
Fire-rated letter plates and spy holes for flat entrance doors
Pull handles, push plates and kick plates fitted within limits
Intumescent wraps or pads behind morticed hardware
Latches, sashlocks and deadlocks with intumescent protection where needed

Morticing	Lock and latch cut-outs within the door's evidence and protected.
Additions	No unapproved bolts, chains or cat flaps through the leaf.
Hinges	Fire-suitable hinges to BS EN 1935, all screws present.

Full details on our fire door hinges & ironmongery page.

How we work in High Peak

One contact

One point of contact for inspections, repairs and replacements across High Peak and Derbyshire.

Priced door by door

Every failed item in High Peak is priced separately, so you approve exactly what you want done.

Booked around you

Visits in High Peak are booked around residents, pupils or patients, including early, late and weekend slots by arrangement.

Fire door law for High Peak buildings

As High Peak is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

High Peak guide prices

In High Peak, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your High Peak building.

Common questions in High Peak

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.

Does regulation 10 apply to buildings in High Peak?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. High Peak is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Can I fit any lock to a fire door?

No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.

Can you price remedial work in High Peak from another company's report?

Yes. Send the report and we will price each line for your building in High Peak, or revisit specific doors if the report lacks detail.