Greater Manchester · M34

Fire Door Hinges & Ironmongery in Denton

We provide fire door ironmongery repairs for buildings in Denton and the M34 postcode district, from single doors to whole blocks and estates.

In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: Denton
County / area: Greater Manchester
Local authority: Tameside
Postcode district: M34
Region: North West England
Population: Around 27,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Hyde (3 km)

Typical buildings in Denton

Village schools, community buildings and small care homes around Denton are typical of local fire door work. Where a Denton building has had a recent fire risk assessment, send it over and we will price against its actions.

Included as standard in Denton

Hinges suitable for fire doors, usually at least three per leaf
Fire-rated letter plates and spy holes for flat entrance doors
Intumescent wraps or pads behind morticed hardware
Removal or correction of non-compliant additions
Latches, sashlocks and deadlocks with intumescent protection where needed

Marking	Hardware CE or UKCA marked where the product standard requires it.
Additions	No unapproved bolts, chains or cat flaps through the leaf.
Morticing	Lock and latch cut-outs within the door's evidence and protected.

Full details on our fire door hinges & ironmongery page.

Why Denton clients choose us

Same report everywhere

Whether your building is in Denton or across the country, the report format, defect grading and pricing are the same.

Priced door by door

Every failed item in Denton is priced separately, so you approve exactly what you want done.

Photos of every defect

You get photographs of every defect found in Denton, linked to a door reference you can find again.

England fire safety law in Denton

As Denton is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

How much do fire door ironmongery repairs cost in Denton?

Typical Denton prices: £70–£190 per item (ex VAT), confirmed as a fixed price before work starts. Get a guide price for your Denton building.

Common questions in Denton

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.

How quickly can you inspect fire doors in Denton?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.

Which fire safety law applies in Denton?

Denton is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.