Greater Manchester · M34

Fire Door Gap Adjustment in Denton

Whether it is a block of flats, a school or a care home in Denton, our fire door gap adjustments follow the same door-by-door method and report format.

Fire door gap adjustment is the work needed to bring the gaps between a fire door leaf and its frame, and under the door, back within the tolerance in the door's evidence, typically 2 to 4 mm around the edges. We use the same method for buildings in Denton.

Town: Denton
County / area: Greater Manchester
Local authority: Tameside
Postcode district: M34
Region: North West England
Population: Around 27,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Hyde (3 km)

Typical Denton fire door jobs

In Denton fire door work tends to be smaller sites: flats above shops, small blocks, surgeries, pubs with rooms and care homes. Reports for Denton buildings keep the same door references from one visit to the next.

Included as standard in Denton

Hardwood lippings fitted to narrow leaves where the evidence allows
Hinges re-packed or replaced where the leaf has dropped
Gap readings at head, hinge side, closing side and threshold
Final readings recorded for the door's file
Threshold gaps corrected or drop seals fitted on smoke control doors

Threshold	Under-door gap suited to the door; tighter on smoke control doors.
Pairs	Meeting stiles on double doors within tolerance and aligned.
Edges	Usually 2–4 mm at head and edges unless the evidence says otherwise.

Full details on our fire door gap adjustment page.

What to expect in Denton

Photos of every defect

You get photographs of every defect found in Denton, linked to a door reference you can find again.

One contact

One point of contact for inspections, repairs and replacements across Denton and Greater Manchester.

Records you can use

PDF and spreadsheet records for every Denton building, ready for your fire risk assessor.

Which fire door rules apply in Denton?

As Denton is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

Denton guide prices

Guide prices for fire door gap adjustments in Denton start from £145 per visit; typical rates are £90–£260 per door, ex VAT. Get a guide price for your Denton building.

Fire Door Gap Adjustment in Denton: questions

How big can the gap under a fire door be?

It depends on the door's evidence. Doors without smoke control often allow a larger threshold gap, sometimes up to around 8 to 10 mm, while smoke control doors usually need 3 mm or less or a tested drop seal.

Do you work in occupied buildings in Denton?

Yes. Inspections and repairs in Denton can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.

Which fire safety law applies in Denton?

Denton is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.

What gap is allowed around a fire door?

Most guidance and manufacturers' evidence expect gaps of about 2 to 4 mm at the head and edges, with 3 mm as a practical target. The door's own certification or test evidence takes precedence if it states a different figure.