East Midlands · England
Fire Door Tagging & Asset Registers in Derbyshire
Managing buildings across Derbyshire? We cover fire door tagging and asset registers in Derby, Chesterfield, High Peak and the rest of the county with one point of contact.
Fire Door Tagging & Asset Registers: Fire door tagging gives every fire door a unique, durable ID tag, usually on the top or hinge edge, linked to a register entry holding its location, rating, components, photos and inspection history.
- Area
- Derbyshire
- Region
- East Midlands
- Postcode areas
- DE, NG, S, SK
- Towns listed
- 13
- Local authorities
- Derby, Derbyshire
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
Included as standard across Derbyshire
- Export to spreadsheet for your own systems
- Inspection history and remedial records against each door
- Register entry for location, rating, size and hardware
- Floor plans marked with door references where provided
- Durable ID tag fitted to each door
- Photos of both faces and key components
How does it work in Derbyshire?
Walk
Every fire door is located and given a unique reference.
Tag
A durable tag is fixed where it will not affect performance.
Record
Specification and photos are added to the register.
Use
Every later inspection and repair is logged against the same ID.
What the law requires in Derbyshire
Derbyshire is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies to the common parts and non-domestic premises, and regulation 10 adds quarterly communal and annual flat entrance door checks in residential buildings with storeys over 11 metres.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
How much does it cost in Derbyshire?
Typical Derbyshire prices: £4–£9 per door (ex VAT). Minimum visit from £145.
Fire Door Tagging & Asset Registers by town in Derbyshire
- Fire Door Tagging & Asset Registers in Alfreton
- Fire Door Tagging & Asset Registers in Belper
- Fire Door Tagging & Asset Registers in Buxton
- Fire Door Tagging & Asset Registers in Chesterfield
- Fire Door Tagging & Asset Registers in Derby
- Fire Door Tagging & Asset Registers in Dronfield
- Fire Door Tagging & Asset Registers in Heanor
- Fire Door Tagging & Asset Registers in High Peak
- Fire Door Tagging & Asset Registers in Ilkeston
- Fire Door Tagging & Asset Registers in Long Eaton
- Fire Door Tagging & Asset Registers in Ripley
- Fire Door Tagging & Asset Registers in Staveley
- Fire Door Tagging & Asset Registers in Swadlincote
Fire Door Tagging & Asset Registers in Derbyshire: questions
Does tagging change the fire rating?
No. Tags are small, fixed with short pins or adhesive in positions that do not affect the door's construction.
Can I keep using my own door numbers?
Yes. We can adopt your existing references or map them to new tags.
Does regulation 10 apply to buildings in Derbyshire?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Derbyshire is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
Do you cover the area around Derbyshire?
Yes. As well as Derbyshire itself we cover nearby towns including Derby, Chesterfield and High Peak.