Wales
Fire Door Hinges & Ironmongery in Mid Glamorgan
Book fire door ironmongery repairs anywhere in Mid Glamorgan: we schedule visits by postcode district to keep travel, and your price, down.
Fire Door Hinges & Ironmongery: Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.
- Area
- Mid Glamorgan
- Region
- Wales
- Postcode areas
- CF
- Towns listed
- 8
- Local authorities
- Bridgend, Merthyr Tydfil, Rhondda Cynon Taff
- Fire safety law
- Wales: Fire Safety Order 2005
What every job in Mid Glamorgan includes
- Intumescent wraps or pads behind morticed hardware
- Removal or correction of non-compliant additions
- Hinges suitable for fire doors, usually at least three per leaf
- Latches, sashlocks and deadlocks with intumescent protection where needed
- Pull handles, push plates and kick plates fitted within limits
- Fire-rated letter plates and spy holes for flat entrance doors
How does it work in Mid Glamorgan?
Identify
We record existing hardware and what the door needs.
Specify
Replacement items chosen with fire test evidence for the door type.
Fit
Hardware fitted with intumescent protection where required.
Test
Door operation checked from both sides.
What the law requires in Mid Glamorgan
Mid Glamorgan is in Wales, where the Fire Safety Order 2005 requires fire doors to be maintained. Regulation 10's fixed quarterly and annual schedule is English law, but many Welsh landlords follow it as good practice.
- Fire Safety Order 2005 applies in Wales
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10's fixed schedule is England-only
- Quarterly and annual checks still widely used as good practice
Guide prices in Mid Glamorgan
Typical Mid Glamorgan prices: £70–£190 per item (ex VAT), confirmed as a fixed price before work starts.
Fire Door Hinges & Ironmongery by town in Mid Glamorgan
- Fire Door Hinges & Ironmongery in Aberdare
- Fire Door Hinges & Ironmongery in Bridgend
- Fire Door Hinges & Ironmongery in Coity
- Fire Door Hinges & Ironmongery in Maesteg
- Fire Door Hinges & Ironmongery in Merthyr Tydfil
- Fire Door Hinges & Ironmongery in Pontypridd
- Fire Door Hinges & Ironmongery in Rhondda
- Fire Door Hinges & Ironmongery in Tonypandy
Fire Door Hinges & Ironmongery in Mid Glamorgan: questions
Can I fit any lock to a fire door?
No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.
Are cat flaps allowed in fire doors?
Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.
Does regulation 10 apply in Mid Glamorgan?
No. Mid Glamorgan is in Wales and regulation 10 is English law. The Fire Safety Order 2005 still requires fire doors to be maintained, and many Welsh landlords follow the same quarterly and annual routine as good practice.
Do you work in occupied buildings in Mid Glamorgan?
Yes. Inspections and repairs in Mid Glamorgan can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.