Mid Glamorgan · CF31

Fire Door Hinges & Ironmongery in Bridgend

Whether it is a block of flats, a school or a care home in Bridgend, our fire door ironmongery repairs follow the same door-by-door method and report format.

In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: Bridgend
County / area: Mid Glamorgan
Local authority: Bridgend
Postcode district: CF31
Region: Wales
Population: Around 50,000 people
Fire safety law: Wales: Fire Safety Order 2005
Nearest town: Coity (2 km)

What kind of buildings in Bridgend need fire door work?

Bridgend has smaller blocks of flats, flats above shops, care homes and schools, where a single day on site often covers every fire door. Where a Bridgend building has had a recent fire risk assessment, send it over and we will price against its actions.

What's included in Bridgend?

Removal or correction of non-compliant additions
Fire-rated letter plates and spy holes for flat entrance doors
Hinges suitable for fire doors, usually at least three per leaf
Intumescent wraps or pads behind morticed hardware
Latches, sashlocks and deadlocks with intumescent protection where needed

Morticing	Lock and latch cut-outs within the door's evidence and protected.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Hinges	Fire-suitable hinges to BS EN 1935, all screws present.

Full details on our fire door hinges & ironmongery page.

Why book with us in Bridgend?

Priced door by door

Every failed item in Bridgend is priced separately, so you approve exactly what you want done.

Photos of every defect

You get photographs of every defect found in Bridgend, linked to a door reference you can find again.

One contact

One point of contact for inspections, repairs and replacements across Bridgend and Mid Glamorgan.

Fire door law for Bridgend buildings

Fire doors in Bridgend must be maintained under the Fire Safety Order 2005, which applies in Wales; the Fire Safety Act 2021 confirmed flat entrance doors are within scope. Regulation 10 itself does not apply in Wales.

How much do fire door ironmongery repairs cost in Bridgend?

In Bridgend, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Bridgend building.

Fire Door Hinges & Ironmongery in Bridgend: questions

Does regulation 10 apply in Bridgend?

No. Bridgend is in Wales and regulation 10 is English law. The Fire Safety Order 2005 still requires fire doors to be maintained, and many Welsh landlords follow the same quarterly and annual routine as good practice.

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Can I fit any lock to a fire door?

No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.

Can you price remedial work in Bridgend from another company's report?

Yes. Send the report and we will price each line for your building in Bridgend, or revisit specific doors if the report lacks detail.