County Durham · DH9

Fire Door Gap Adjustment in Stanley

Whether it is a block of flats, a school or a care home in Stanley, our fire door gap adjustments follow the same door-by-door method and report format.

In short: fire door gap adjustment is the work needed to bring the gaps between a fire door leaf and its frame, and under the door, back within the tolerance in the door's evidence, typically 2 to 4 mm around the edges.

Town: Stanley
County / area: County Durham
County council: County Durham
Postcode district: DH9
Region: North East England
Population: Around 31,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Chester-le-Street (8 km)

Where fire doors matter most in Stanley

In Stanley fire door work tends to be smaller sites: flats above shops, small blocks, surgeries, pubs with rooms and care homes. If you look after more than one building around Stanley, we can schedule them on the same day.

What our fire door gap adjustment covers in Stanley

Hinges re-packed or replaced where the leaf has dropped
Threshold gaps corrected or drop seals fitted on smoke control doors
Final readings recorded for the door's file
Gap readings at head, hinge side, closing side and threshold
Hardwood lippings fitted to narrow leaves where the evidence allows

Threshold	Under-door gap suited to the door; tighter on smoke control doors.
Pairs	Meeting stiles on double doors within tolerance and aligned.
Edges	Usually 2–4 mm at head and edges unless the evidence says otherwise.

Full details on our fire door gap adjustment page.

What to expect in Stanley

Priced door by door

Every failed item in Stanley is priced separately, so you approve exactly what you want done.

Booked around you

Visits in Stanley are booked around residents, pupils or patients, including early, late and weekend slots by arrangement.

Photos of every defect

You get photographs of every defect found in Stanley, linked to a door reference you can find again.

Fire safety law that applies in Stanley

As Stanley is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

What will it cost in Stanley?

Guide prices for fire door gap adjustments in Stanley start from £145 per visit; typical rates are £90–£260 per door, ex VAT. Get a guide price for your Stanley building.

Questions from Stanley clients

Do you work in occupied buildings in Stanley?

Yes. Inspections and repairs in Stanley can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.

What gap is allowed around a fire door?

Most guidance and manufacturers' evidence expect gaps of about 2 to 4 mm at the head and edges, with 3 mm as a practical target. The door's own certification or test evidence takes precedence if it states a different figure.

Does regulation 10 apply to buildings in Stanley?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Stanley is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Why do gaps open up over time?

Hinges wear and drop, frames shrink or move, leaves warp, and doors are sometimes planed after flooring changes. Each needs a different repair.