County Durham · DH8

Fire Door Gap Adjustment in Consett

Whether it is a block of flats, a school or a care home in Consett, our fire door gap adjustments follow the same door-by-door method and report format.

Fire door gap adjustment is the work needed to bring the gaps between a fire door leaf and its frame, and under the door, back within the tolerance in the door's evidence, typically 2 to 4 mm around the edges. We use the same method for buildings in Consett.

Town: Consett
County / area: County Durham
County council: County Durham
Postcode district: DH8
Region: North East England
Population: Around 29,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Stanley (9 km)

Where fire doors matter most in Consett

In Consett fire door work tends to be smaller sites: flats above shops, small blocks, surgeries, pubs with rooms and care homes. We can work early, late or at weekends in Consett where residents, pupils or patients make daytime access difficult.

What our fire door gap adjustment covers in Consett

Hinges re-packed or replaced where the leaf has dropped
Final readings recorded for the door's file
Gap readings at head, hinge side, closing side and threshold
Threshold gaps corrected or drop seals fitted on smoke control doors
Hardwood lippings fitted to narrow leaves where the evidence allows

Cause	Dropped hinges, warping or frame movement fixed, not masked.
Edges	Usually 2–4 mm at head and edges unless the evidence says otherwise.
Pairs	Meeting stiles on double doors within tolerance and aligned.

Full details on our fire door gap adjustment page.

What to expect in Consett

Priced door by door

Every failed item in Consett is priced separately, so you approve exactly what you want done.

One contact

One point of contact for inspections, repairs and replacements across Consett and County Durham.

Booked around you

Visits in Consett are booked around residents, pupils or patients, including early, late and weekend slots by arrangement.

England fire safety law in Consett

Consett is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies to the common parts and non-domestic premises, and regulation 10 adds quarterly communal and annual flat entrance door checks in residential buildings with storeys over 11 metres.

Consett guide prices

In Consett, fire door gap adjustments typically cost £90–£260 per door ex VAT, with visits from £145. Get a guide price for your Consett building.

Consett FAQs

How big can the gap under a fire door be?

It depends on the door's evidence. Doors without smoke control often allow a larger threshold gap, sometimes up to around 8 to 10 mm, while smoke control doors usually need 3 mm or less or a tested drop seal.

Can you price remedial work in Consett from another company's report?

Yes. Send the report and we will price each line for your building in Consett, or revisit specific doors if the report lacks detail.

What gap is allowed around a fire door?

Most guidance and manufacturers' evidence expect gaps of about 2 to 4 mm at the head and edges, with 3 mm as a practical target. The door's own certification or test evidence takes precedence if it states a different figure.

Which fire safety law applies in Consett?

Consett is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.