Nottinghamshire · S80

Fire Stopping Around Doors in Worksop

Fire Stopping Around Doors in Worksop, Nottinghamshire: every door logged, photographed and graded, with a clear price for anything that needs putting right.

Fire stopping is the sealing of gaps and openings in fire-resisting walls and floors so fire and smoke cannot pass through. Around a fire door it mainly means the gap between the door frame and the wall, which must be sealed as well as the door itself.

Town: Worksop
County / area: Nottinghamshire
County council: Nottinghamshire
Postcode district: S80
Region: East Midlands
Population: Around 45,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Retford (12 km)

What kind of buildings in Worksop need fire door work?

Worksop has smaller blocks of flats, flats above shops, care homes and schools, where a single day on site often covers every fire door. Reports for Worksop buildings keep the same door references from one visit to the next.

What you get in Worksop

Gaps sealed with suitable intumescent mastic, foam or stone wool
Penetration labels and a register where required
Architraves refitted after sealing
Photographs before and after each seal
Service penetrations near doors sealed in compartment walls

Gap	Frame-to-wall gap fully filled to the depth required.
Evidence	Before and after photos for each location.
Penetrations	Pipes and cables through compartment walls sealed.

Full details on our fire stopping around doors page.

How we work in Worksop

Photos of every defect

You get photographs of every defect found in Worksop, linked to a door reference you can find again.

Records you can use

PDF and spreadsheet records for every Worksop building, ready for your fire risk assessor.

Same report everywhere

Whether your building is in Worksop or across the country, the report format, defect grading and pricing are the same.

Fire safety law that applies in Worksop

Buildings in Worksop fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.

How much do fire stopping works cost in Worksop?

In Worksop, fire stopping works typically cost £60–£180 per door frame ex VAT, depending on the building and specification. Get a guide price for your Worksop building.

Worksop FAQs

Does regulation 10 apply to buildings in Worksop?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Worksop is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Will I get photos?

Yes. Every sealed location is photographed before and after, and logged.

Do you need to remove architraves?

Often, yes. The frame gap is usually hidden behind the architrave, so we remove and refit it to inspect and seal properly.

How quickly can you inspect fire doors in Worksop?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.