Nottinghamshire · S80

Intumescent & Smoke Seal Replacement in Worksop

Looking for a fire door seal replacement in Worksop? We inspect, repair and replace fire doors across Worksop and surrounding parts of Nottinghamshire, with a door-by-door report and every remedial item priced separately.

Intumescent seals are strips set into the edge of a fire door or its frame that expand when heated to close the gap around the door. Smoke seals, usually brush or fin seals, block cold smoke before the intumescent reacts. Both are part of the door's tested performance. We use the same method for buildings in Worksop.

Town: Worksop
County / area: Nottinghamshire
County council: Nottinghamshire
Postcode district: S80
Region: East Midlands
Population: Around 45,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Retford (12 km)

Where fire doors matter most in Worksop

Worksop has smaller blocks of flats, flats above shops, care homes and schools, where a single day on site often covers every fire door. Where a Worksop building has had a recent fire risk assessment, send it over and we will price against its actions.

Included as standard in Worksop

Survey of the seal type, size and position for each door
Threshold or drop-down seals where smoke control is required
Old seals removed cleanly from the groove
Seals on hanging, closing and head edges, and meeting stiles on pairs
Gap readings checked so new seals can work

Size	Width and position match the door's evidence and gap.
Continuity	No breaks, overlaps or missing lengths.
Type	Intumescent only or combined with a smoke seal, to suit the door's rating.

Full details on our intumescent & smoke seal replacement page.

Why book with us in Worksop?

Photos of every defect

You get photographs of every defect found in Worksop, linked to a door reference you can find again.

Same report everywhere

Whether your building is in Worksop or across the country, the report format, defect grading and pricing are the same.

Records you can use

PDF and spreadsheet records for every Worksop building, ready for your fire risk assessor.

Fire safety law that applies in Worksop

As Worksop is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

What will it cost in Worksop?

In Worksop, fire door seal replacements typically cost £45–£110 per door ex VAT, with visits from £145. Get a guide price for your Worksop building.

Common questions in Worksop

What is the difference between an intumescent strip and a smoke seal?

An intumescent strip expands in heat to seal the gap during a fire. A smoke seal, often a brush or blade, blocks cold smoke at lower temperatures. Smoke control doors, marked with an S such as FD30S, need both.

Can you price remedial work in Worksop from another company's report?

Yes. Send the report and we will price each line for your building in Worksop, or revisit specific doors if the report lacks detail.

Can I just stick new seals over the old ones?

No. Seals should be fitted into the groove after the old seal is removed, in the size and type the door was tested with.

Does regulation 10 apply to buildings in Worksop?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Worksop is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.