Isle of Wight · PO36

Fire Door Gap Adjustment in Sandown

From the PO36 district outwards, we cover Sandown and neighbouring towns such as Ryde and Newport for fire door gap adjustments.

In short: fire door gap adjustment is the work needed to bring the gaps between a fire door leaf and its frame, and under the door, back within the tolerance in the door's evidence, typically 2 to 4 mm around the edges.

Town: Sandown
County / area: Isle of Wight
County council: Isle of Wight
Postcode district: PO36
Region: South East England
Population: Around 20,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Ryde (9 km)

Typical buildings in Sandown

In Sandown fire door work tends to be smaller sites: flats above shops, small blocks, surgeries, pubs with rooms and care homes. If you look after more than one building around Sandown, we can schedule them on the same day.

What happens on site in Sandown?

Frame adjustment or re-fixing where the frame has moved
Final readings recorded for the door's file
Threshold gaps corrected or drop seals fitted on smoke control doors
Gap readings at head, hinge side, closing side and threshold
Hinges re-packed or replaced where the leaf has dropped

Threshold	Under-door gap suited to the door; tighter on smoke control doors.
Pairs	Meeting stiles on double doors within tolerance and aligned.
Edges	Usually 2–4 mm at head and edges unless the evidence says otherwise.

Full details on our fire door gap adjustment page.

Why book with us in Sandown?

Priced door by door

Every failed item in Sandown is priced separately, so you approve exactly what you want done.

Booked around you

Visits in Sandown are booked around residents, pupils or patients, including early, late and weekend slots by arrangement.

Same report everywhere

Whether your building is in Sandown or across the country, the report format, defect grading and pricing are the same.

Which fire door rules apply in Sandown?

As Sandown is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

What will it cost in Sandown?

Typical Sandown prices: £90–£260 per door (ex VAT). Minimum visit from £145. Get a guide price for your Sandown building.

Fire Door Gap Adjustment in Sandown: questions

What gap is allowed around a fire door?

Most guidance and manufacturers' evidence expect gaps of about 2 to 4 mm at the head and edges, with 3 mm as a practical target. The door's own certification or test evidence takes precedence if it states a different figure.

Do you work in occupied buildings in Sandown?

Yes. Inspections and repairs in Sandown can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.

Why do gaps open up over time?

Hinges wear and drop, frames shrink or move, leaves warp, and doors are sometimes planed after flooring changes. Each needs a different repair.

Which fire safety law applies in Sandown?

Sandown is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.