South East England · England
Fire Door Gap Adjustment in the Isle of Wight
We provide fire door gap adjustments across the Isle of Wight, including Newport, Ryde and Cowes, with the same report format and pricing wherever your buildings are.
Fire Door Gap Adjustment: Fire door gap adjustment is the work needed to bring the gaps between a fire door leaf and its frame, and under the door, back within the tolerance in the door's evidence, typically 2 to 4 mm around the edges.
- Area
- Isle of Wight
- Region
- South East England
- Postcode areas
- PO
- Towns listed
- 4
- Local authorities
- Isle of Wight
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
What's included in the Isle of Wight?
- Hardwood lippings fitted to narrow leaves where the evidence allows
- Frame adjustment or re-fixing where the frame has moved
- Threshold gaps corrected or drop seals fitted on smoke control doors
- Final readings recorded for the door's file
- Hinges re-packed or replaced where the leaf has dropped
- Gap readings at head, hinge side, closing side and threshold
How does it work in the Isle of Wight?
Measure
Gaps are measured at several points on every edge.
Diagnose
We identify why the gap has opened.
Correct
Hinges, leaf or frame are corrected using a method the door's evidence supports.
Re-measure
Final gap readings are recorded.
Fire door law for the Isle of Wight buildings
Buildings in the Isle of Wight fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
Prices across the Isle of Wight
Typical the Isle of Wight prices: £90–£260 per door (ex VAT). Minimum visit from £145.
Fire Door Gap Adjustment by town in the Isle of Wight
- Fire Door Gap Adjustment in Cowes
- Fire Door Gap Adjustment in Newport (Isle of Wight)
- Fire Door Gap Adjustment in Ryde
- Fire Door Gap Adjustment in Sandown
Fire Door Gap Adjustment in the Isle of Wight: questions
Can you fix a big gap with a thicker intumescent strip?
Not as a general rule. Seals are tested for a particular gap; using oversized seals to hide a poor fit is not a reliable repair.
What gap is allowed around a fire door?
Most guidance and manufacturers' evidence expect gaps of about 2 to 4 mm at the head and edges, with 3 mm as a practical target. The door's own certification or test evidence takes precedence if it states a different figure.
Does regulation 10 apply to buildings in the Isle of Wight?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. the Isle of Wight is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
Do you cover the area around the Isle of Wight?
Yes. As well as the Isle of Wight itself we cover nearby towns including Newport, Ryde and Cowes.