Kent · CT9

Intumescent & Smoke Seal Replacement in Margate

Looking for a fire door seal replacement in Margate? We inspect, repair and replace fire doors across Margate and surrounding parts of Kent, with a door-by-door report and every remedial item priced separately.

In short: intumescent seals are strips set into the edge of a fire door or its frame that expand when heated to close the gap around the door. Smoke seals, usually brush or fin seals, block cold smoke before the intumescent reacts. Both are part of the door's tested performance.

Town: Margate
County / area: Kent
County council: Kent
Postcode district: CT9
Region: South East England
Population: Around 63,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Saint Peters (3 km)

Where fire doors matter most in Margate

Seafront blocks of flats, care homes and hospitality buildings make up much of the building stock with fire doors in Margate. We can work early, late or at weekends in Margate where residents, pupils or patients make daytime access difficult.

What our fire door seal replacement covers in Margate

Seals on hanging, closing and head edges, and meeting stiles on pairs
Survey of the seal type, size and position for each door
Threshold or drop-down seals where smoke control is required
Old seals removed cleanly from the groove
Intumescent-only or combined intumescent and smoke seals as required

Size	Width and position match the door's evidence and gap.
Continuity	No breaks, overlaps or missing lengths.
Paint	Smoke seals free of paint so they can work.

Full details on our intumescent & smoke seal replacement page.

Why book with us in Margate?

Same report everywhere

Whether your building is in Margate or across the country, the report format, defect grading and pricing are the same.

Priced door by door

Every failed item in Margate is priced separately, so you approve exactly what you want done.

One contact

One point of contact for inspections, repairs and replacements across Margate and Kent.

England fire safety law in Margate

Buildings in Margate fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.

What will it cost in Margate?

Typical Margate prices: £45–£110 per door (ex VAT). Minimum visit from £145. Get a guide price for your Margate building.

Margate FAQs

Will new seals fix a door with big gaps?

No. Seals only work within the gap they were tested with. Gaps outside tolerance need the door adjusting first.

Does regulation 10 apply to buildings in Margate?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Margate is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Can I just stick new seals over the old ones?

No. Seals should be fitted into the groove after the old seal is removed, in the size and type the door was tested with.

Do you work in occupied buildings in Margate?

Yes. Inspections and repairs in Margate can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.