West Midlands · England
Intumescent & Smoke Seal Replacement in Herefordshire
Intumescent & Smoke Seal Replacement throughout Herefordshire, scheduled by postcode district to keep travel costs down.
Intumescent & Smoke Seal Replacement: Intumescent seals are strips set into the edge of a fire door or its frame that expand when heated to close the gap around the door. Smoke seals, usually brush or fin seals, block cold smoke before the intumescent reacts. Both are part of the door's tested performance.
- Area
- Herefordshire
- Region
- West Midlands
- Postcode areas
- HR, WR
- Towns listed
- 1
- Local authorities
- Herefordshire
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
Included as standard across Herefordshire
- Gap readings checked so new seals can work
- Threshold or drop-down seals where smoke control is required
- Survey of the seal type, size and position for each door
- Intumescent-only or combined intumescent and smoke seals as required
- Old seals removed cleanly from the groove
- Seals on hanging, closing and head edges, and meeting stiles on pairs
How does it work in Herefordshire?
Identify
We confirm the seal type and size the door needs.
Remove
Old or damaged seals are removed and grooves cleaned.
Fit
New seals are fitted in continuous lengths, mitred at the head.
Check
The door is closed and checked for binding or gaps.
England fire safety law across Herefordshire
As Herefordshire is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
Guide prices in Herefordshire
Typical Herefordshire prices: £45–£110 per door (ex VAT). Minimum visit from £145.
Intumescent & Smoke Seal Replacement by town in Herefordshire
Intumescent & Smoke Seal Replacement in Herefordshire: questions
Can intumescent strips be painted?
Brush and fin smoke seals should never be painted, because paint stops them working. Some intumescent strips tolerate a light coat, but the safest rule is to mask all seals before decorating and replace any that have been painted.
Can I just stick new seals over the old ones?
No. Seals should be fitted into the groove after the old seal is removed, in the size and type the door was tested with.
Does regulation 10 apply to buildings in Herefordshire?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Herefordshire is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
How quickly can you inspect fire doors in Herefordshire?
It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.