Yorkshire and the Humber · England
Fire Door Tagging & Asset Registers in South Yorkshire
Managing buildings across South Yorkshire? We cover fire door tagging and asset registers in Sheffield, Rotherham, Doncaster and the rest of the county with one point of contact.
Fire Door Tagging & Asset Registers: Fire door tagging gives every fire door a unique, durable ID tag, usually on the top or hinge edge, linked to a register entry holding its location, rating, components, photos and inspection history.
- Area
- South Yorkshire
- Region
- Yorkshire and the Humber
- Postcode areas
- DN, S
- Towns listed
- 8
- Local authorities
- Barnsley, Doncaster, Rotherham, Sheffield
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
What's included in South Yorkshire?
- Export to spreadsheet for your own systems
- Inspection history and remedial records against each door
- Photos of both faces and key components
- Floor plans marked with door references where provided
- Register entry for location, rating, size and hardware
- Durable ID tag fitted to each door
How does it work in South Yorkshire?
Walk
Every fire door is located and given a unique reference.
Tag
A durable tag is fixed where it will not affect performance.
Record
Specification and photos are added to the register.
Use
Every later inspection and repair is logged against the same ID.
What the law requires in South Yorkshire
As South Yorkshire is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
How much does it cost in South Yorkshire?
In South Yorkshire, fire door tagging and asset registers typically cost £4–£9 per door ex VAT, with visits from £145.
Fire Door Tagging & Asset Registers by town in South Yorkshire
- Fire Door Tagging & Asset Registers in Barnsley
- Fire Door Tagging & Asset Registers in Bentley
- Fire Door Tagging & Asset Registers in Burngreave
- Fire Door Tagging & Asset Registers in Chapeltown
- Fire Door Tagging & Asset Registers in Darton
- Fire Door Tagging & Asset Registers in Doncaster
- Fire Door Tagging & Asset Registers in Rotherham
- Fire Door Tagging & Asset Registers in Sheffield
Fire Door Tagging & Asset Registers in South Yorkshire: questions
Where is the tag fitted?
Usually on the top edge or hinge edge of the leaf, where it can be read without affecting the door's seals or performance.
Does tagging change the fire rating?
No. Tags are small, fixed with short pins or adhesive in positions that do not affect the door's construction.
Does regulation 10 apply to buildings in South Yorkshire?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. South Yorkshire is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
Do you work in occupied buildings in South Yorkshire?
Yes. Inspections and repairs in South Yorkshire can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.