North West England · England
Fire Door Tagging & Asset Registers in Lancashire
Our fire door tagging and asset registers cover the whole of Lancashire, across local authorities including Blackburn with Darwen, Blackpool, Lancashire.
Fire Door Tagging & Asset Registers: Fire door tagging gives every fire door a unique, durable ID tag, usually on the top or hinge edge, linked to a register entry holding its location, rating, components, photos and inspection history.
- Area
- Lancashire
- Region
- North West England
- Postcode areas
- BB, FY, L, LA, OL, PR, WN
- Towns listed
- 20
- Local authorities
- Blackburn with Darwen, Blackpool, Lancashire
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
Included as standard across Lancashire
- Photos of both faces and key components
- Floor plans marked with door references where provided
- Export to spreadsheet for your own systems
- Inspection history and remedial records against each door
- Durable ID tag fitted to each door
- Register entry for location, rating, size and hardware
How does it work in Lancashire?
Walk
Every fire door is located and given a unique reference.
Tag
A durable tag is fixed where it will not affect performance.
Record
Specification and photos are added to the register.
Use
Every later inspection and repair is logged against the same ID.
Which fire door rules apply in Lancashire?
As Lancashire is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
How much does it cost in Lancashire?
Guide prices for fire door tagging and asset registers in Lancashire start from £145 per visit; typical rates are £4–£9 per door, ex VAT.
Fire Door Tagging & Asset Registers by town in Lancashire
- Fire Door Tagging & Asset Registers in Accrington
- Fire Door Tagging & Asset Registers in Blackburn
- Fire Door Tagging & Asset Registers in Blackpool
- Fire Door Tagging & Asset Registers in Burnley
- Fire Door Tagging & Asset Registers in Chorley
- Fire Door Tagging & Asset Registers in Colne
- Fire Door Tagging & Asset Registers in Darwen
- Fire Door Tagging & Asset Registers in Fleetwood
- Fire Door Tagging & Asset Registers in Fylde
- Fire Door Tagging & Asset Registers in Lancaster
- Fire Door Tagging & Asset Registers in Leyland
- Fire Door Tagging & Asset Registers in Lytham St Annes
- Fire Door Tagging & Asset Registers in Morecambe
- Fire Door Tagging & Asset Registers in Nelson
- Fire Door Tagging & Asset Registers in Ormskirk
- Fire Door Tagging & Asset Registers in Preston
- Fire Door Tagging & Asset Registers in Rawtenstall
- Fire Door Tagging & Asset Registers in Rossendale
- Fire Door Tagging & Asset Registers in Skelmersdale
- Fire Door Tagging & Asset Registers in Thornton-Cleveleys
Fire Door Tagging & Asset Registers in Lancashire: questions
Does tagging change the fire rating?
No. Tags are small, fixed with short pins or adhesive in positions that do not affect the door's construction.
What format is the register?
A spreadsheet export is always provided, with photos. It can be imported into most asset and compliance systems.
Which fire safety law applies in Lancashire?
Lancashire is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.
How quickly can you inspect fire doors in Lancashire?
It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.