East of England · England
Fire Door Tagging & Asset Registers in Hertfordshire
Our fire door tagging and asset registers cover the whole of Hertfordshire, across local authorities including Hertfordshire.
Fire Door Tagging & Asset Registers: Fire door tagging gives every fire door a unique, durable ID tag, usually on the top or hinge edge, linked to a register entry holding its location, rating, components, photos and inspection history.
- Area
- Hertfordshire
- Region
- East of England
- Postcode areas
- AL, CM, EN, HP, SG, WD
- Towns listed
- 19
- Local authorities
- Hertfordshire
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
What's included in Hertfordshire?
- Floor plans marked with door references where provided
- Durable ID tag fitted to each door
- Register entry for location, rating, size and hardware
- Photos of both faces and key components
- Export to spreadsheet for your own systems
- Inspection history and remedial records against each door
How does it work in Hertfordshire?
Walk
Every fire door is located and given a unique reference.
Tag
A durable tag is fixed where it will not affect performance.
Record
Specification and photos are added to the register.
Use
Every later inspection and repair is logged against the same ID.
Which fire door rules apply in Hertfordshire?
Hertfordshire is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies to the common parts and non-domestic premises, and regulation 10 adds quarterly communal and annual flat entrance door checks in residential buildings with storeys over 11 metres.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
Prices across Hertfordshire
Guide prices for fire door tagging and asset registers in Hertfordshire start from £145 per visit; typical rates are £4–£9 per door, ex VAT.
Fire Door Tagging & Asset Registers by town in Hertfordshire
- Fire Door Tagging & Asset Registers in Berkhamsted
- Fire Door Tagging & Asset Registers in Bishops Stortford
- Fire Door Tagging & Asset Registers in Borehamwood
- Fire Door Tagging & Asset Registers in Bushey
- Fire Door Tagging & Asset Registers in Cheshunt
- Fire Door Tagging & Asset Registers in Harpenden
- Fire Door Tagging & Asset Registers in Hatfield
- Fire Door Tagging & Asset Registers in Hemel Hempstead
- Fire Door Tagging & Asset Registers in Hertford
- Fire Door Tagging & Asset Registers in Hitchin
- Fire Door Tagging & Asset Registers in Hoddesdon
- Fire Door Tagging & Asset Registers in Letchworth Garden City
- Fire Door Tagging & Asset Registers in North Watford
- Fire Door Tagging & Asset Registers in Potters Bar
- Fire Door Tagging & Asset Registers in Rickmansworth
- Fire Door Tagging & Asset Registers in St Albans
- Fire Door Tagging & Asset Registers in Stevenage
- Fire Door Tagging & Asset Registers in Watford
- Fire Door Tagging & Asset Registers in Welwyn Garden City
Fire Door Tagging & Asset Registers in Hertfordshire: questions
Does tagging change the fire rating?
No. Tags are small, fixed with short pins or adhesive in positions that do not affect the door's construction.
What format is the register?
A spreadsheet export is always provided, with photos. It can be imported into most asset and compliance systems.
Does regulation 10 apply to buildings in Hertfordshire?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Hertfordshire is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
Do you work in occupied buildings in Hertfordshire?
Yes. Inspections and repairs in Hertfordshire can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.