South West England · England
Fire Door Tagging & Asset Registers in Gloucestershire
Our fire door tagging and asset registers cover the whole of Gloucestershire, across local authorities including Gloucestershire, South Gloucestershire.
Fire Door Tagging & Asset Registers: Fire door tagging gives every fire door a unique, durable ID tag, usually on the top or hinge edge, linked to a register entry holding its location, rating, components, photos and inspection history.
- Area
- Gloucestershire
- Region
- South West England
- Postcode areas
- BS, GL
- Towns listed
- 8
- Local authorities
- Gloucestershire, South Gloucestershire
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
What's included in Gloucestershire?
- Register entry for location, rating, size and hardware
- Durable ID tag fitted to each door
- Photos of both faces and key components
- Export to spreadsheet for your own systems
- Inspection history and remedial records against each door
- Floor plans marked with door references where provided
How does it work in Gloucestershire?
Walk
Every fire door is located and given a unique reference.
Tag
A durable tag is fixed where it will not affect performance.
Record
Specification and photos are added to the register.
Use
Every later inspection and repair is logged against the same ID.
Which fire door rules apply in Gloucestershire?
As Gloucestershire is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.
- Fire Safety Order 2005: fire doors must be maintained (article 17)
- Fire Safety Act 2021: flat entrance doors are within scope
- Regulation 10: quarterly communal checks and annual flat door checks above 11 m
- Building Safety Act 2022: stronger record keeping and information duties
Guide prices in Gloucestershire
In Gloucestershire, fire door tagging and asset registers typically cost £4–£9 per door ex VAT, with visits from £145.
Fire Door Tagging & Asset Registers by town in Gloucestershire
- Fire Door Tagging & Asset Registers in Cheltenham
- Fire Door Tagging & Asset Registers in Cirencester
- Fire Door Tagging & Asset Registers in Gloucester
- Fire Door Tagging & Asset Registers in Kingswood
- Fire Door Tagging & Asset Registers in Mangotsfield
- Fire Door Tagging & Asset Registers in Stroud
- Fire Door Tagging & Asset Registers in Tewkesbury
- Fire Door Tagging & Asset Registers in Yate
Fire Door Tagging & Asset Registers in Gloucestershire: questions
Where is the tag fitted?
Usually on the top edge or hinge edge of the leaf, where it can be read without affecting the door's seals or performance.
What format is the register?
A spreadsheet export is always provided, with photos. It can be imported into most asset and compliance systems.
Does regulation 10 apply to buildings in Gloucestershire?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Gloucestershire is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
Do you work in occupied buildings in Gloucestershire?
Yes. Inspections and repairs in Gloucestershire can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.