Surrey · TW20

Fire Door Repairs in Egham

From the TW20 district outwards, we cover Egham and neighbouring towns such as Staines and Ashford for fire door repairs.

A fire door repair fixes a specific fault on a fire door, such as a broken closer, missing seal, loose hinge or damaged edge, so the door can again close, latch and resist fire and smoke as it was designed to. We use the same method for buildings in Egham.

Town: Egham
County / area: Surrey
County council: Surrey
Postcode district: TW20
Region: South East England
Population: Around 30,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Staines (3 km)

Typical Egham fire door jobs

Egham has purpose-built student blocks and shared houses alongside university, hospital and council buildings with long runs of corridor doors. Egham jobs start with a short call to agree access, followed by a fixed price in writing.

What our fire door repair covers in Egham

Missing or damaged intumescent strips and smoke seals replaced
Before and after photographs for your records
Edge, lipping and impact damage repaired where the door's evidence allows
Loose or missing glazing beads refixed with the correct system
Diagnosis of why the door is failing, not just the visible symptom

Cause	Why the door failed, such as a dropped hinge or wrong closer power, is fixed too.
Compatibility	Parts chosen to suit the door's fire rating and test evidence.
Operation	The door closes and latches from fully open before we leave.

Full details on our fire door repairs page.

How we work in Egham

Records you can use

PDF and spreadsheet records for every Egham building, ready for your fire risk assessor.

Priced door by door

Every failed item in Egham is priced separately, so you approve exactly what you want done.

Photos of every defect

You get photographs of every defect found in Egham, linked to a door reference you can find again.

England fire safety law in Egham

As Egham is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

What will it cost in Egham?

In Egham, fire door repairs typically cost £95–£350 per door ex VAT, with visits from £145. Get a guide price for your Egham building.

Common questions in Egham

Do you use the original manufacturer's parts?

Where they are available and appropriate. Otherwise we use components with suitable fire test evidence for the door type.

How quickly can you inspect fire doors in Egham?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.

Can a damaged fire door be repaired or does it need replacing?

Many faults can be repaired: closers, hinges, seals, small edge damage and beads. Holes through the leaf, major splits, delamination or damage to the frame often mean the door should be replaced. We will tell you which applies and why.

Does regulation 10 apply to buildings in Egham?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Egham is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.