Gwent · NP11

Fire Door Installation in Risca

We provide fire door installations for buildings in Risca and the NP11 postcode district, from single doors to whole blocks and estates.

In short: fire door installation is the supply and fitting of a fire-resisting door, ideally as a complete doorset of leaf, frame, seals and hardware, installed exactly as its test evidence and the manufacturer's instructions require, so the finished door performs as tested.

Town: Risca
County / area: Gwent
Local authority: Caerphilly
Postcode district: NP11
Region: Wales
Population: Around 20,000 people
Fire safety law: Wales: Fire Safety Order 2005
Nearest town: Newport (Gwent) (7 km)

Typical buildings in Risca

Risca has its share of converted buildings and older doors of unknown origin, where an inspection records what evidence exists. We can work early, late or at weekends in Risca where residents, pupils or patients make daytime access difficult.

Included as standard in Risca

Glazed doors and vision panels from a matching fire-rated system
Ironmongery, closers, seals and signage to suit the doorset
FD30, FD30S, FD60 and FD60S doorsets, single and double
Flat entrance doorsets with fire, smoke and security performance
Handover pack: product evidence, installation record and photos

Rating	FD30 or FD60, with an S suffix where smoke control is required.
Sealing	Frame-to-wall gaps sealed with a material suited to the gap and the wall.
Evidence	Certification and installation records handed over for the building file.

Full details on our fire door installation page.

Why book with us in Risca?

Same report everywhere

Whether your building is in Risca or across the country, the report format, defect grading and pricing are the same.

Photos of every defect

You get photographs of every defect found in Risca, linked to a door reference you can find again.

Records you can use

PDF and spreadsheet records for every Risca building, ready for your fire risk assessor.

Which fire door rules apply in Risca?

Fire doors in Risca must be maintained under the Fire Safety Order 2005, which applies in Wales; the Fire Safety Act 2021 confirmed flat entrance doors are within scope. Regulation 10 itself does not apply in Wales.

Risca guide prices

In Risca, fire door installations typically cost £750–£1,800 per doorset ex VAT, depending on the building and specification. Get a guide price for your Risca building.

Questions from Risca clients

Do you provide paperwork?

Yes. You receive the product's certification or test evidence, an installation record and photographs for each door.

Does regulation 10 apply in Risca?

No. Risca is in Wales and regulation 10 is English law. The Fire Safety Order 2005 still requires fire doors to be maintained, and many Welsh landlords follow the same quarterly and annual routine as good practice.

What do FD30 and FD60 mean?

They describe how long the door is designed to resist fire in a test: 30 or 60 minutes. An S after the rating, such as FD30S, means the door also controls the passage of cold smoke.

How quickly can you inspect fire doors in Risca?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.