Surrey · SM7

Fire Door Inspections in Banstead

Fire Door Inspections in Banstead, Surrey: every door logged, photographed and graded, with a clear price for anything that needs putting right.

A fire door inspection is a documented, door-by-door check that each fire door in a building will still hold back fire and smoke for its rated period. The inspector examines the leaf, frame, gaps, seals, hinges, closer, glazing, ironmongery and signage, records what passes and what fails, and photographs every defect. We use the same method for buildings in Banstead.

Town: Banstead
County / area: Surrey
County council: Surrey
Postcode district: SM7
Region: South East England
Population: Around 46,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Sutton (3 km)

What kind of buildings in Banstead need fire door work?

Typical fire door jobs in Banstead include converted houses split into flats, HMOs, surgeries and small office buildings. Banstead jobs start with a short call to agree access, followed by a fixed price in writing.

What our fire door inspection covers in Banstead

Leaf and frame condition, including damage, splits, delamination and unauthorised alterations
A unique reference and location for every door, so faults can be found again
Hinges, closer, latch, lock and any hold-open device checked for function and suitability
Vision panels, glazing beads and air transfer grilles checked against the door's rating
Fire door signage present and correct for the door's use

Evidence	A certification label or plug where present, recorded so the door's original specification can be traced.
Hinges	At least three hinges on most single leaves, all screws present, no wear, staining or movement.
Closer	The door closes fully into its frame and engages the latch from any opening position.

Full details on our fire door inspections page.

How we work in Banstead

Records you can use

PDF and spreadsheet records for every Banstead building, ready for your fire risk assessor.

One contact

One point of contact for inspections, repairs and replacements across Banstead and Surrey.

Same report everywhere

Whether your building is in Banstead or across the country, the report format, defect grading and pricing are the same.

Fire safety law that applies in Banstead

Buildings in Banstead fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.

What will it cost in Banstead?

In Banstead, fire door inspections typically cost £12–£35 per door ex VAT, with visits from £195. Get a guide price for your Banstead building.

Fire Door Inspections in Banstead: questions

Do you need to remove the doors?

No. Inspections are non-intrusive. The inspector measures, operates and photographs each door in place and only lifts away removable items such as letter-plate covers where it is safe to do so.

Does regulation 10 apply to buildings in Banstead?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Banstead is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

How long does a fire door inspection take?

Typically 10 to 20 minutes per door, depending on access and how many defects need photographing. A block with 40 communal doors is usually a single day on site.

Can you price remedial work in Banstead from another company's report?

Yes. Send the report and we will price each line for your building in Banstead, or revisit specific doors if the report lacks detail.