Kent · CT1

Fire Door Hold-Open Devices in Canterbury

We provide fire door hold-open devices for buildings in Canterbury and the CT1 postcode district, from single doors to whole blocks and estates.

A fire door hold-open device keeps a fire door open in normal use and releases it to close automatically when the fire alarm activates. Free-swing closers let the door move freely like an ordinary door, then close it on alarm.

Town: Canterbury
County / area: Kent
County council: Kent
Postcode district: CT1
Region: South East England
Population: Around 55,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Whitstable (10 km)

Where fire doors matter most in Canterbury

Canterbury has purpose-built student blocks and shared houses alongside university, hospital and council buildings with long runs of corridor doors. Canterbury jobs start with a short call to agree access, followed by a fixed price in writing.

What happens on site in Canterbury?

A record of the device and the test for the fire log
Acoustic hold-open units that release on the alarm sound
Wire-free radio units linked to compatible alarm systems
Free-swing closers for residents who struggle with door weight
Testing of release on alarm and of the door's closing action

Closing	After release the door closes fully and latches.
Suitability	Device and closer compatible with the door and alarm.
Testing	Devices included in the weekly alarm test routine.

Full details on our fire door hold-open devices page.

What to expect in Canterbury

Priced door by door

Every failed item in Canterbury is priced separately, so you approve exactly what you want done.

Photos of every defect

You get photographs of every defect found in Canterbury, linked to a door reference you can find again.

Records you can use

PDF and spreadsheet records for every Canterbury building, ready for your fire risk assessor.

Fire safety law that applies in Canterbury

As Canterbury is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

How much do fire door hold-open devices cost in Canterbury?

Typical Canterbury prices: £280–£650 per door (ex VAT). Minimum visit from £280. Get a guide price for your Canterbury building.

Common questions in Canterbury

Can hold-open devices be used on flat entrance doors?

Generally not on flat entrance doors in residential blocks. They are mainly used on corridor and cross-corridor doors in other buildings, subject to the fire risk assessment.

How quickly can you inspect fire doors in Canterbury?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.

Which fire safety law applies in Canterbury?

Canterbury is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.

How often should they be tested?

With the weekly fire alarm test, and checked in detail at each fire door inspection.