Wiltshire · SP1

Fire Door Hinges & Ironmongery in Salisbury

Looking for a fire door ironmongery repair in Salisbury? We inspect, repair and replace fire doors across Salisbury and surrounding parts of Wiltshire, with a door-by-door report and every remedial item priced separately.

Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire. We use the same method for buildings in Salisbury.

Town: Salisbury
County / area: Wiltshire
County council: Wiltshire
Postcode district: SP1
Region: South West England
Population: Around 45,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Andover (26 km)

Typical buildings in Salisbury

Care homes, schools and small residential blocks are typical Salisbury buildings with fire doors to look after. If you look after more than one building around Salisbury, we can schedule them on the same day.

What happens on site in Salisbury?

Intumescent wraps or pads behind morticed hardware
Removal or correction of non-compliant additions
Latches, sashlocks and deadlocks with intumescent protection where needed
Hinges suitable for fire doors, usually at least three per leaf
Pull handles, push plates and kick plates fitted within limits

Additions	No unapproved bolts, chains or cat flaps through the leaf.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Hinges	Fire-suitable hinges to BS EN 1935, all screws present.

Full details on our fire door hinges & ironmongery page.

How we work in Salisbury

Priced door by door

Every failed item in Salisbury is priced separately, so you approve exactly what you want done.

Photos of every defect

You get photographs of every defect found in Salisbury, linked to a door reference you can find again.

One contact

One point of contact for inspections, repairs and replacements across Salisbury and Wiltshire.

Fire safety law that applies in Salisbury

Buildings in Salisbury fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.

How much do fire door ironmongery repairs cost in Salisbury?

Guide prices for fire door ironmongery repairs in Salisbury are typically £70–£190 per item, ex VAT. Get a guide price for your Salisbury building.

Common questions in Salisbury

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Do letter plates on flat doors need to be fire-rated?

Yes, where the flat entrance door is a fire door. Fire-rated letter plates include intumescent liners that close the opening in a fire.

Which fire safety law applies in Salisbury?

Salisbury is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies, together with the Fire Safety (England) Regulations 2022 for multi-occupied residential buildings.

Do you work in occupied buildings in Salisbury?

Yes. Inspections and repairs in Salisbury can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.