West Midlands · CV1

Fire Door Hinges & Ironmongery in Coventry

Fire Door Hinges & Ironmongery in Coventry, West Midlands: every door logged, photographed and graded, with a clear price for anything that needs putting right.

In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: Coventry
County / area: West Midlands
Local authority: Coventry
Postcode district: CV1
Region: West Midlands
Population: Around 350,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Kenilworth (8 km)

Where fire doors matter most in Coventry

With a large student population, Coventry has plenty of HMOs and halls, where wedged doors and disconnected closers are common problems. If you look after more than one building around Coventry, we can schedule them on the same day.

What our fire door ironmongery repair covers in Coventry

Fire-rated letter plates and spy holes for flat entrance doors
Pull handles, push plates and kick plates fitted within limits
Hinges suitable for fire doors, usually at least three per leaf
Removal or correction of non-compliant additions
Intumescent wraps or pads behind morticed hardware

Hinges	Fire-suitable hinges to BS EN 1935, all screws present.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Additions	No unapproved bolts, chains or cat flaps through the leaf.

Full details on our fire door hinges & ironmongery page.

How we work in Coventry

Records you can use

PDF and spreadsheet records for every Coventry building, ready for your fire risk assessor.

Photos of every defect

You get photographs of every defect found in Coventry, linked to a door reference you can find again.

One contact

One point of contact for inspections, repairs and replacements across Coventry and the West Midlands.

Fire safety law that applies in Coventry

Buildings in Coventry fall under English fire safety law: the Fire Safety Order 2005 requires fire doors to be maintained, and in multi-occupied residential buildings over 11 metres regulation 10 sets quarterly and annual checks.

What will it cost in Coventry?

In Coventry, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Coventry building.

Questions from Coventry clients

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Does regulation 10 apply to buildings in Coventry?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Coventry is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Can I fit any lock to a fire door?

No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.

Do you cover the area around Coventry?

Yes. As well as Coventry itself we cover nearby towns including Kenilworth, Bedworth and Nuneaton.