Tyne and Wear · NE33

Fire Door Hinges & Ironmongery in South Shields

Whether it is a block of flats, a school or a care home in South Shields, our fire door ironmongery repairs follow the same door-by-door method and report format.

In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: South Shields
County / area: Tyne and Wear
Local authority: South Tyneside
Postcode district: NE33
Region: North East England
Population: Around 84,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Tynemouth (2 km)

Where fire doors matter most in South Shields

Sea air is hard on hardware: corroded hinges and closers are a common fire door fault in coastal towns such as South Shields. Reports for South Shields buildings keep the same door references from one visit to the next.

What's included in South Shields?

Pull handles, push plates and kick plates fitted within limits
Latches, sashlocks and deadlocks with intumescent protection where needed
Intumescent wraps or pads behind morticed hardware
Fire-rated letter plates and spy holes for flat entrance doors
Removal or correction of non-compliant additions

Hinges	Fire-suitable hinges to BS EN 1935, all screws present.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Morticing	Lock and latch cut-outs within the door's evidence and protected.

Full details on our fire door hinges & ironmongery page.

Why South Shields clients choose us

Records you can use

PDF and spreadsheet records for every South Shields building, ready for your fire risk assessor.

Same report everywhere

Whether your building is in South Shields or across the country, the report format, defect grading and pricing are the same.

One contact

One point of contact for inspections, repairs and replacements across South Shields and Tyne and Wear.

Which fire door rules apply in South Shields?

As South Shields is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

How much do fire door ironmongery repairs cost in South Shields?

Typical South Shields prices: £70–£190 per item (ex VAT), confirmed as a fixed price before work starts. Get a guide price for your South Shields building.

Common questions in South Shields

Do you work in occupied buildings in South Shields?

Yes. Inspections and repairs in South Shields can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.

Does regulation 10 apply to buildings in South Shields?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. South Shields is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Can I fit any lock to a fire door?

No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.