FIREDOORINSPECTIONS.UK

Scotland

Fire Door Hinges & Ironmongery in Perth & Kinross

Across Perth & Kinross, including rural and island locations, we carry out fire door ironmongery repairs for landlords, housing providers, schools and businesses.

Fire Door Hinges & Ironmongery: Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Area
Perth & Kinross
Region
Scotland
Postcode areas
KY, PH
Towns listed
1
Local authorities
Perth and Kinross
Fire safety law
Scotland: Fire (Scotland) Act 2005

Included as standard across Perth & Kinross

  • Pull handles, push plates and kick plates fitted within limits
  • Intumescent wraps or pads behind morticed hardware
  • Hinges suitable for fire doors, usually at least three per leaf
  • Removal or correction of non-compliant additions
  • Latches, sashlocks and deadlocks with intumescent protection where needed
  • Fire-rated letter plates and spy holes for flat entrance doors

How does it work in Perth & Kinross?

  1. Identify

    We record existing hardware and what the door needs.

  2. Specify

    Replacement items chosen with fire test evidence for the door type.

  3. Fit

    Hardware fitted with intumescent protection where required.

  4. Test

    Door operation checked from both sides.

Scotland fire safety law across Perth & Kinross

Perth & Kinross is in Scotland, where fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. Regulation 10 is English law, but regular documented checks are still good practice.

  • Fire (Scotland) Act 2005 and 2006 regulations: workplaces, HMOs and other non-domestic premises
  • Private blocks: common parts largely outside the Act; title deeds and Scottish Government guidance apply
  • Scottish building standards for new and altered doors
  • Regulation 10's fixed schedule is England-only

How much does it cost in Perth & Kinross?

In Perth & Kinross, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification.

Fire Door Hinges & Ironmongery by town in Perth & Kinross

Fire Door Hinges & Ironmongery in Perth & Kinross: questions

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Which fire safety law applies in Perth & Kinross?

In Scotland, fire safety duties for workplaces, HMOs and other non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006, with new work designed to the Scottish building standards.

Do you work in occupied buildings in Perth & Kinross?

Yes. Inspections and repairs in Perth & Kinross can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.

Other services in Perth & Kinross

Fire Door Hinges & Ironmongery in Perth & Kinross

Hinges, locks, latches, handles and letter plates replaced with fire-tested, compatible hardware.