Nottinghamshire · DN22

Fire Door Hinges & Ironmongery in Retford

Retford landlords, managing agents and facilities teams can book fire door ironmongery repairs with straightforward reports and fixed prices.

Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: Retford
County / area: Nottinghamshire
County council: Nottinghamshire
Postcode district: DN22
Region: East Midlands
Population: Around 22,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Worksop (12 km)

Where fire doors matter most in Retford

In Retford fire door work tends to be smaller sites: flats above shops, small blocks, surgeries, pubs with rooms and care homes. For fire door ironmongery repairs, we group Retford visits with nearby buildings wherever possible to keep your price down.

Included as standard in Retford

Removal or correction of non-compliant additions
Hinges suitable for fire doors, usually at least three per leaf
Fire-rated letter plates and spy holes for flat entrance doors
Intumescent wraps or pads behind morticed hardware
Pull handles, push plates and kick plates fitted within limits

Hinges	Fire-suitable hinges to BS EN 1935, all screws present.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Additions	No unapproved bolts, chains or cat flaps through the leaf.

Full details on our fire door hinges & ironmongery page.

How we work in Retford

Photos of every defect

You get photographs of every defect found in Retford, linked to a door reference you can find again.

Records you can use

PDF and spreadsheet records for every Retford building, ready for your fire risk assessor.

Same report everywhere

Whether your building is in Retford or across the country, the report format, defect grading and pricing are the same.

Which fire door rules apply in Retford?

As Retford is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

What will it cost in Retford?

In Retford, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Retford building.

Common questions in Retford

Do letter plates on flat doors need to be fire-rated?

Yes, where the flat entrance door is a fire door. Fire-rated letter plates include intumescent liners that close the opening in a fire.

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.

Does regulation 10 apply to buildings in Retford?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Retford is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Can you price remedial work in Retford from another company's report?

Yes. Send the report and we will price each line for your building in Retford, or revisit specific doors if the report lacks detail.