Lancashire · BB8

Fire Door Hinges & Ironmongery in Colne

From the BB8 district outwards, we cover Colne and neighbouring towns such as Nelson and Burnley for fire door ironmongery repairs.

In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: Colne
County / area: Lancashire
County council: Lancashire
Postcode district: BB8
Region: North West England
Population: Around 20,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Nelson (3 km)

Where fire doors matter most in Colne

In Colne fire door work tends to be smaller sites: flats above shops, small blocks, surgeries, pubs with rooms and care homes. Reports for Colne buildings keep the same door references from one visit to the next.

What's included in Colne?

Removal or correction of non-compliant additions
Hinges suitable for fire doors, usually at least three per leaf
Latches, sashlocks and deadlocks with intumescent protection where needed
Pull handles, push plates and kick plates fitted within limits
Intumescent wraps or pads behind morticed hardware

Marking	Hardware CE or UKCA marked where the product standard requires it.
Hinges	Fire-suitable hinges to BS EN 1935, all screws present.
Additions	No unapproved bolts, chains or cat flaps through the leaf.

Full details on our fire door hinges & ironmongery page.

Why Colne clients choose us

Priced door by door

Every failed item in Colne is priced separately, so you approve exactly what you want done.

One contact

One point of contact for inspections, repairs and replacements across Colne and Lancashire.

Records you can use

PDF and spreadsheet records for every Colne building, ready for your fire risk assessor.

Fire safety law that applies in Colne

As Colne is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

How much do fire door ironmongery repairs cost in Colne?

In Colne, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Colne building.

Common questions in Colne

Can I fit any lock to a fire door?

No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.

How quickly can you inspect fire doors in Colne?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.

Does regulation 10 apply to buildings in Colne?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Colne is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.