FIREDOORINSPECTIONS.UK

South East England · England

Fire Door Hinges & Ironmongery in Kent

Book fire door ironmongery repairs anywhere in Kent: we schedule visits by postcode district to keep travel, and your price, down.

Fire Door Hinges & Ironmongery: Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Area
Kent
Region
South East England
Postcode areas
BR, CT, DA, ME, TN
Towns listed
24
Local authorities
Kent, Medway
Fire safety law
England: Fire Safety Order 2005 + regulation 10 above 11 m

Included as standard across Kent

  • Pull handles, push plates and kick plates fitted within limits
  • Hinges suitable for fire doors, usually at least three per leaf
  • Removal or correction of non-compliant additions
  • Latches, sashlocks and deadlocks with intumescent protection where needed
  • Fire-rated letter plates and spy holes for flat entrance doors
  • Intumescent wraps or pads behind morticed hardware

How does it work in Kent?

  1. Identify

    We record existing hardware and what the door needs.

  2. Specify

    Replacement items chosen with fire test evidence for the door type.

  3. Fit

    Hardware fitted with intumescent protection where required.

  4. Test

    Door operation checked from both sides.

England fire safety law across Kent

As Kent is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

  • Fire Safety Order 2005: fire doors must be maintained (article 17)
  • Fire Safety Act 2021: flat entrance doors are within scope
  • Regulation 10: quarterly communal checks and annual flat door checks above 11 m
  • Building Safety Act 2022: stronger record keeping and information duties

Guide prices in Kent

Typical Kent prices: £70–£190 per item (ex VAT), confirmed as a fixed price before work starts.

Fire Door Hinges & Ironmongery by town in Kent

Fire Door Hinges & Ironmongery in Kent: questions

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Can I fit any lock to a fire door?

No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.

Does regulation 10 apply to buildings in Kent?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Kent is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

How quickly can you inspect fire doors in Kent?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.

Other services in Kent

Fire Door Hinges & Ironmongery in Kent

Hinges, locks, latches, handles and letter plates replaced with fire-tested, compatible hardware.