Greater Manchester · M2

Fire Door Hinges & Ironmongery in Manchester

Looking for a fire door ironmongery repair in Manchester? We inspect, repair and replace fire doors across Manchester and surrounding parts of Greater Manchester, with a door-by-door report and every remedial item priced separately.

Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire. We use the same method for buildings in Manchester.

Town: Manchester
County / area: Greater Manchester
County council: Greater Manchester
Postcode district: M2
Region: North West England
Population: Around 570,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Salford (4 km)

Where fire doors matter most in Manchester

Halls and shared houses in Manchester are easiest to inspect between tenancies, when bedroom doors can be repaired without disturbing residents. Manchester jobs start with a short call to agree access, followed by a fixed price in writing.

Included as standard in Manchester

Latches, sashlocks and deadlocks with intumescent protection where needed
Hinges suitable for fire doors, usually at least three per leaf
Fire-rated letter plates and spy holes for flat entrance doors
Intumescent wraps or pads behind morticed hardware
Removal or correction of non-compliant additions

Hinges	Fire-suitable hinges to BS EN 1935, all screws present.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Additions	No unapproved bolts, chains or cat flaps through the leaf.

Full details on our fire door hinges & ironmongery page.

Why book with us in Manchester?

Records you can use

PDF and spreadsheet records for every Manchester building, ready for your fire risk assessor.

Same report everywhere

Whether your building is in Manchester or across the country, the report format, defect grading and pricing are the same.

Photos of every defect

You get photographs of every defect found in Manchester, linked to a door reference you can find again.

England fire safety law in Manchester

Manchester is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies to the common parts and non-domestic premises, and regulation 10 adds quarterly communal and annual flat entrance door checks in residential buildings with storeys over 11 metres.

How much do fire door ironmongery repairs cost in Manchester?

In Manchester, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Manchester building.

Questions from Manchester clients

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Does regulation 10 apply to buildings in Manchester?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Manchester is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Can you price remedial work in Manchester from another company's report?

Yes. Send the report and we will price each line for your building in Manchester, or revisit specific doors if the report lacks detail.

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.