Greater London · SM4

Fire Door Hinges & Ironmongery in Morden

Looking for a fire door ironmongery repair in Morden? We inspect, repair and replace fire doors across Morden and surrounding parts of Greater London, with a door-by-door report and every remedial item priced separately.

Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: Morden
County / area: Greater London
Postcode district: SM4
Region: London
Population: Around 48,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Mitcham (2 km)

Typical buildings in Morden

Many Morden buildings are mixed use, with flats above shops and offices, where the stair door protecting the flats is often the weakest point. Morden jobs start with a short call to agree access, followed by a fixed price in writing.

What happens on site in Morden?

Pull handles, push plates and kick plates fitted within limits
Removal or correction of non-compliant additions
Fire-rated letter plates and spy holes for flat entrance doors
Intumescent wraps or pads behind morticed hardware
Hinges suitable for fire doors, usually at least three per leaf

Morticing	Lock and latch cut-outs within the door's evidence and protected.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Additions	No unapproved bolts, chains or cat flaps through the leaf.

Full details on our fire door hinges & ironmongery page.

Why book with us in Morden?

Priced door by door

Every failed item in Morden is priced separately, so you approve exactly what you want done.

One contact

One point of contact for inspections, repairs and replacements across Morden and Greater London.

Records you can use

PDF and spreadsheet records for every Morden building, ready for your fire risk assessor.

Which fire door rules apply in Morden?

As Morden is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

What will it cost in Morden?

Typical Morden prices: £70–£190 per item (ex VAT), confirmed as a fixed price before work starts. Get a guide price for your Morden building.

Morden FAQs

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

How quickly can you inspect fire doors in Morden?

It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.

Does regulation 10 apply to buildings in Morden?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Morden is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

How many hinges does a fire door need?

Most single-leaf fire doors use three hinges; taller or heavier leaves may need four. The door's test evidence specifies the number and type.