Greater London · N9

Fire Door Hinges & Ironmongery in Edmonton

Whether it is a block of flats, a school or a care home in Edmonton, our fire door ironmongery repairs follow the same door-by-door method and report format.

In short: fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire.

Town: Edmonton
County / area: Greater London
Postcode district: N9
Region: London
Population: Around 82,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Tottenham (2 km)

Where fire doors matter most in Edmonton

Buildings in Edmonton range from post-war council blocks to new-build towers and converted Victorian houses split into flats, each with its own fire door issues. Where an Edmonton building has had a recent fire risk assessment, send it over and we will price against its actions.

What you get in Edmonton

Hinges suitable for fire doors, usually at least three per leaf
Pull handles, push plates and kick plates fitted within limits
Intumescent wraps or pads behind morticed hardware
Removal or correction of non-compliant additions
Latches, sashlocks and deadlocks with intumescent protection where needed

Hinges	Fire-suitable hinges to BS EN 1935, all screws present.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Morticing	Lock and latch cut-outs within the door's evidence and protected.

Full details on our fire door hinges & ironmongery page.

What to expect in Edmonton

One contact

One point of contact for inspections, repairs and replacements across Edmonton and Greater London.

Priced door by door

Every failed item in Edmonton is priced separately, so you approve exactly what you want done.

Photos of every defect

You get photographs of every defect found in Edmonton, linked to a door reference you can find again.

Fire safety law that applies in Edmonton

As Edmonton is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.

How much do fire door ironmongery repairs cost in Edmonton?

In Edmonton, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Edmonton building.

Edmonton FAQs

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Do letter plates on flat doors need to be fire-rated?

Yes, where the flat entrance door is a fire door. Fire-rated letter plates include intumescent liners that close the opening in a fire.

Do you work in occupied buildings in Edmonton?

Yes. Inspections and repairs in Edmonton can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.

Does regulation 10 apply to buildings in Edmonton?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Edmonton is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.