Greater London · EN5
Fire Door Hinges & Ironmongery in Barnet
Need a fire door ironmongery repair in Barnet? Tell us the building and roughly how many doors, and we will confirm a fixed price before booking.
Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire. We use the same method for buildings in Barnet.
- Town
- Barnet
- County / area
- Greater London
- Postcode district
- EN5
- Region
- London
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
- Nearest town
- Hadley Wood (3 km)
Where fire doors matter most in Barnet
Buildings in Barnet range from post-war council blocks to new-build towers and converted Victorian houses split into flats, each with its own fire door issues. Reports for Barnet buildings keep the same door references from one visit to the next.
What happens on site in Barnet?
- Latches, sashlocks and deadlocks with intumescent protection where needed
- Removal or correction of non-compliant additions
- Fire-rated letter plates and spy holes for flat entrance doors
- Hinges suitable for fire doors, usually at least three per leaf
- Intumescent wraps or pads behind morticed hardware
| Additions | No unapproved bolts, chains or cat flaps through the leaf. |
|---|---|
| Morticing | Lock and latch cut-outs within the door's evidence and protected. |
| Marking | Hardware CE or UKCA marked where the product standard requires it. |
Full details on our fire door hinges & ironmongery page.
What to expect in Barnet
Photos of every defect
You get photographs of every defect found in Barnet, linked to a door reference you can find again.
One contact
One point of contact for inspections, repairs and replacements across Barnet and Greater London.
Booked around you
Visits in Barnet are booked around residents, pupils or patients, including early, late and weekend slots by arrangement.
Fire safety law that applies in Barnet
As Barnet is in England, responsible persons must maintain fire doors under the Fire Safety Order 2005, give residents fire door information in buildings with two or more flats, and run regulation 10 checks where a storey is over 11 metres.
Prices in Barnet
In Barnet, fire door ironmongery repairs typically cost £70–£190 per item ex VAT, depending on the building and specification. Get a guide price for your Barnet building.
Barnet FAQs
Can I fit any lock to a fire door?
No. The lock must be suitable for fire doors and fitted within the size limits of the door's evidence, often with intumescent protection around the mortice.
How quickly can you inspect fire doors in Barnet?
It depends on the number of doors and access. Tell us what you need and we will give you the earliest date when you call, and confirm it in writing.
Do letter plates on flat doors need to be fire-rated?
Yes, where the flat entrance door is a fire door. Fire-rated letter plates include intumescent liners that close the opening in a fire.
Does regulation 10 apply to buildings in Barnet?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Barnet is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
Nearby towns we cover
- Fire Door Hinges & Ironmongery in Hadley Wood
- Fire Door Hinges & Ironmongery in Potters Bar
- Fire Door Hinges & Ironmongery in Borehamwood
- Fire Door Hinges & Ironmongery in Finchley
- Fire Door Hinges & Ironmongery in Muswell Hill
- Fire Door Hinges & Ironmongery in Enfield Town
Other fire door services in Barnet
- Fire Door Repairs in Barnet
- Intumescent & Smoke Seal Replacement in Barnet
- Fire Door Tagging & Asset Registers in Barnet
- Fire Stopping Around Doors in Barnet
- Fire Door Inspections in Barnet
- Fire Door Remedial Works in Barnet
- Fire Door Signage in Barnet
- Fire Door Maintenance Contracts in Barnet
- All services in Barnet