Gloucestershire · GL6

Fire Door Hinges & Ironmongery in Stroud

Need a fire door ironmongery repair in Stroud? Tell us the building and roughly how many doors, and we will confirm a fixed price before booking.

Fire door ironmongery is the hardware on a fire door, hinges, latches, locks, handles, closers, letter plates and spy holes, which must be suitable for use on fire doors so it does not create a weak point when the door is exposed to fire. We use the same method for buildings in Stroud.

Town: Stroud
County / area: Gloucestershire
County council: Gloucestershire
Postcode district: GL6
Region: South West England
Population: Around 60,000 people
Fire safety law: England: Fire Safety Order 2005 + regulation 10 above 11 m
Nearest town: Gloucester (13 km)

Typical Stroud fire door jobs

Care homes, schools and small residential blocks are typical Stroud buildings with fire doors to look after. Stroud jobs start with a short call to agree access, followed by a fixed price in writing.

What's included in Stroud?

Intumescent wraps or pads behind morticed hardware
Removal or correction of non-compliant additions
Pull handles, push plates and kick plates fitted within limits
Latches, sashlocks and deadlocks with intumescent protection where needed
Fire-rated letter plates and spy holes for flat entrance doors

Hinges	Fire-suitable hinges to BS EN 1935, all screws present.
Marking	Hardware CE or UKCA marked where the product standard requires it.
Additions	No unapproved bolts, chains or cat flaps through the leaf.

Full details on our fire door hinges & ironmongery page.

Why book with us in Stroud?

Same report everywhere

Whether your building is in Stroud or across the country, the report format, defect grading and pricing are the same.

Booked around you

Visits in Stroud are booked around residents, pupils or patients, including early, late and weekend slots by arrangement.

Photos of every defect

You get photographs of every defect found in Stroud, linked to a door reference you can find again.

Fire safety law that applies in Stroud

Stroud is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies to the common parts and non-domestic premises, and regulation 10 adds quarterly communal and annual flat entrance door checks in residential buildings with storeys over 11 metres.

How much do fire door ironmongery repairs cost in Stroud?

Typical Stroud prices: £70–£190 per item (ex VAT), confirmed as a fixed price before work starts. Get a guide price for your Stroud building.

Questions from Stroud clients

Do letter plates on flat doors need to be fire-rated?

Yes, where the flat entrance door is a fire door. Fire-rated letter plates include intumescent liners that close the opening in a fire.

Does regulation 10 apply to buildings in Stroud?

Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Stroud is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.

Are cat flaps allowed in fire doors?

Not unless the flap is part of the door's tested design. A cat flap cut into a fire door, including many flat entrance doors, will normally make it non-compliant.

Do you work in occupied buildings in Stroud?

Yes. Inspections and repairs in Stroud can be carried out in occupied flats, schools, care homes and workplaces, with doors kept closable at all times.