West Sussex · BN11
Fire Door Closer Repairs in Worthing
We provide fire door closer repairs for buildings in Worthing and the BN11 postcode district, from single doors to whole blocks and estates.
A fire door closer is the self-closing device that pulls a fire door shut after it has been opened. If the closer cannot close the door fully into its frame and engage the latch, the door cannot hold back fire or smoke.
- Town
- Worthing
- County / area
- West Sussex
- County council
- West Sussex
- Postcode district
- BN11
- Region
- South East England
- Population
- Around 110,000 people
- Fire safety law
- England: Fire Safety Order 2005 + regulation 10 above 11 m
- Nearest town
- Portslade (12 km)
Typical Worthing fire door jobs
Sea air is hard on hardware: corroded hinges and closers are a common fire door fault in coastal towns such as Worthing. We can work early, late or at weekends in Worthing where residents, pupils or patients make daytime access difficult.
What's included in Worthing?
- Delayed-action closers where users need more time
- Closer power matched to door size, weight and wind exposure
- A record of closer type for every door
- Replacement of leaking, broken or underpowered closers
- Overhead, concealed and floor-spring closers
| Latching | Door engages the latch from any opening position. |
|---|---|
| Effort | Opening force kept as low as the door allows for users. |
| Fixings | Closer and arm securely fixed, with no oil leaks. |
Full details on our fire door closer repairs page.
Why book with us in Worthing?
Same report everywhere
Whether your building is in Worthing or across the country, the report format, defect grading and pricing are the same.
Records you can use
PDF and spreadsheet records for every Worthing building, ready for your fire risk assessor.
Photos of every defect
You get photographs of every defect found in Worthing, linked to a door reference you can find again.
Fire door law for Worthing buildings
Worthing is in England, so the Regulatory Reform (Fire Safety) Order 2005 applies to the common parts and non-domestic premises, and regulation 10 adds quarterly communal and annual flat entrance door checks in residential buildings with storeys over 11 metres.
Prices in Worthing
Typical Worthing prices: £45–£280 per door (ex VAT). Minimum visit from £145. Get a guide price for your Worthing building.
Common questions in Worthing
What closer does a fire door need?
A closer tested to BS EN 1154 with a power size suited to the door's width and weight, and evidence it can be used on the door type. Concealed closers need specific test evidence for the door.
Do you cover the area around Worthing?
Yes. As well as Worthing itself we cover nearby towns including Portslade, Littlehampton and Hove.
Why won't my fire door close properly?
Common causes are a closer set too weak, a latch out of line with the keep, dropped hinges, a seal binding at the edge, or flooring that has raised the threshold. We find the cause before adjusting the closer.
Does regulation 10 apply to buildings in Worthing?
Yes, if the building is a multi-occupied residential building with storeys over 11 metres. Worthing is in England, so the quarterly communal door checks and annual flat entrance door checks apply to those buildings.
Fire door services near Worthing
- Fire Door Closer Repairs in Portslade
- Fire Door Closer Repairs in Littlehampton
- Fire Door Closer Repairs in Hove
- Fire Door Closer Repairs in Brighton
- Fire Door Closer Repairs in Bognor Regis
- Fire Door Closer Repairs in Rottingdean
Other fire door services in Worthing
- Fire Door Hinges & Ironmongery in Worthing
- Quarterly Communal Fire Door Checks in Worthing
- Fire Door Repairs in Worthing
- Fire Stopping Around Doors in Worthing
- Fire Door Installation in Worthing
- Urgent Fire Door Repairs in Worthing
- Fire Door Hold-Open Devices in Worthing
- Annual Flat Entrance Door Checks in Worthing
- All services in Worthing